Eurovac Products

EI Industrial Portables with Pre-Separator offer high vacuum performance for one to five technicians operating depending on what type of source capture tools are being used or whether they are vacuum housekeeping.  The addition of a cyclonic pre-separator provides additional particulate separation for demanding high dust volume applications.

Application:   

• 1 to 3 Tech Housekeeping Vacuum System
• 1 to 3 Tech Grinder Vacuum System
• 1 to 5 Tech Orbital Sander Vacuum System

Part Numbers: 

• EIP-P05-181440P2:  5HP Portable w/ Pre-Separator
• EIP-P10-181440P2:  10HP Portable w/ Pre-Separator

Equipment Specs:   

• Construction:  Fully welded steel construction
• Finish:  Texture Blue powder coated painted finish
• Blower:  Regenerative Blower set to run for 20,000+ hours of continuous use
• Filtration: Initial Cyclonic pre-separator, secondary filter separator, after polyester cartridge filter (42 sq. ft. filter media) (99.93% efficient at 3 microns or larger) and final manual compressed air pulse jet cleaning
• Canister: 10 Gallon (Pre-Separator) & 20 Gallon (Filter Separator)
• Controls:  Starter with overload protection
• Electrical: 208-240, 460 and 575 volts. 3 phase, 60 hertz
• Inlets:  3″OD

System Performance:                                            

5HP System

• Vacuum – 100″WC
• Flow – 160 CFM

10HP System

• Vacuum – 100″WC
• Flow – 310 CFM

Includes:

• Silencer, Exhaust Cap & Air Filter Regulator (For Pulse Jet Cleaning)
• Pre-wiring from panel to pump
• Magnahelic gauge (Indicates when pressure differential is too high and filters need replacement)

Not Included:

• Electrical Disconnect
• Three phase cord and plug

Optional Additions:

• HEPA Filtration (HEP-R17-1B0300RP)
• 2.3HP to 5HP:  208-230-240, 1 Phase, 60 Hz Electrical
• Inlet Manifolds: Qty 3 to 6 – 1.5” Inlets