Eurovac Products

The EII 2.5HP Central Welding Vacuum System offers high vacuum performance for one technician vacuuming or using a source capture welding gun.  The system is typically connected with galvanized tubing to conveniently located wall or hanging drops with a longest run of no more than 100’.  If the EII 2.5HP System is needed for fume capture right near the unit, a vacuum inlet can be added to the system for use with a hose connection.

Application:   

• 1 Tech Welding System

Part Number: 

• SYS-050-163L000N

Equipment Specs:   

• Blower:  2.5HP Brush Motor (4000 Hrs Intermittent Duty) – 1549 watt motor
• Filtration: 14″ Cyclonic filter separator & final nanofiber cartridge filter (99.93% efficient at 3 microns or larger)
• Canister: 10 Gallon canister
• Controls (On/Off/Auto Switch):  Set to Auto for wiring (24v) to Remote Start Switches.  Controls include Automatic Shut Down After Set Period of Time (Auto shut down is adjustable from 1 to 30 minute’s)
• Electrical: 115/1/60 – 13.9 amp (US / Canada) 15amp Circuit Req’d. Includes 12′ Electrical Cord
• Inlet:  2″OD
• Unit on Legs: (Wall mount version available upon request)
• Dba:  70 @ 3M

System Performance:                                            

• Vacuum – 146.6″WC
• Flow – 141.5 CFM

Optional Additions:

• System wall mount bracket (SYS-050-16300000)
• 2.5HP Brushless Motor (20,000 Hrs Continuous Use) – 20 Amp Circuit Required.  Vacuum – 105″WC / Flow – 120 CFM
• 1-1/2” Inlet Valve (SYS-050-163L0010):  Addition of inlet allows for direct plug in of work hose (instead of central tube/bends/fittings)
• Automatic Pulse Jet Cleaning (SYS-050-163LAP00):  System increases to 18” Diameter
• HEPA Filtration (SYS-050-195)